In short
A putting green in the garden consists of a special, very short artificial turf (usually around 12–16 mm) on an exactly profiled, compacted sub-base. Just 10–20 m² is enough for varied practice with two to three holes. Flatness, infill sand, and the right fiber are crucial for a realistic rolling behavior.
Golfers know it: the outcome is decided on the green. Your own putting green in the garden makes daily practice possible – without driving to the course and in any weather. However, for it to feel like a real green, it takes more than just a short strip of turf.
Planning: Size, Shape, and Location
| Size | Options | Suitable For |
|---|---|---|
| approx. 5–10 m² | 1–2 holes, short putts | small gardens, patios |
| approx. 10–25 m² | 2–3 holes, gentle breaks | most private gardens |
| from approx. 25 m² | multiple holes, undulations, possibly a chipping area | ambitious golfers, hotels, clubs |
- Shape: Curved, natural shapes look more upscale than rectangles and offer more putt lines
- Location: as level as possible, well-drained, and not directly under trees (leaves, resin, needles)
- Undulations: slight slopes in the sub-base create breaks just like on the course
- Surroundings: a collar of slightly longer artificial turf around the green looks natural and protects the edges
Which artificial turf is suitable?
Special surfaces with very short, dense fiber are used for putting greens – often made of polypropylene or polyamide, frequently with textured fibers. One example from a manufacturer’s data sheet: 16 mm pile height, filled with 5–8 kg of quartz sand per m², with a stated ball speed of Stimp 12.
| Feature | Typical for Putting Green | For Comparison: Garden Artificial Turf |
|---|---|---|
| Pile Height | approx. 10–16 mm | approx. 25–45 mm |
| Fiber | short, dense, often textured | longer, natural look |
| Infill | Quartz sand for stabilization | often unfilled or little sand |
| Ball Speed | depends on the surface and infill | not relevant |
In golf, ball speed is measured with the Stimpmeter: the higher the value, the faster the ball rolls. Surface, sand quantity, and compaction affect how fast and evenly the green plays.
The Sub-Base: The Heart of It All
- Excavation and a load-bearing gravel base layer for stability and drainage
- A fine leveling layer, e.g. made of crushed sand or fine chippings, precisely profiled
- Thorough compaction with a plate compactor – unevenness shows up immediately in the rolling behavior
- Setting hole cups before the surface is installed
- Installing the artificial turf, joining seams invisibly, brushing in sand
You can find the basics of sub-base construction in our guide Artificial Turf Sub-Base.
What Does a Putting Green in the Garden Cost?
The costs depend heavily on size, design, and sub-base. Special surfaces for putting greens usually cost more per square meter than garden artificial turf, and the precise sub-base requires more effort. For a rough estimate, see our article What Does Artificial Turf Cost?. We provide a binding quote after an on-site visit.
Maintaining a Putting Green
- Remove leaves and debris regularly, e.g. with a leaf blower
- Top up and brush in sand as needed to keep speed and rolling behavior consistent
- Check hole areas and edges
- No spikes and no heavy furniture on the green
Our Advice
With a putting green, the precision of the sub-base determines the feel of play. We plan the shape, undulations, and hole positions with you and install the right surface – Artificial Turf from the Pros or Get in Touch.
Frequently Asked Questions About Putting Greens in the Garden
How big should a putting green in the garden be?
Just 10 to 20 square meters is enough for varied practice with two to three holes. Smaller areas are suitable for short putts.
Which artificial turf is suitable for a putting green?
Special putting green surfaces with very short, dense fiber of about 10 to 16 millimeters, usually filled with quartz sand.
Can you build a putting green yourself?
Possible, but demanding. Even small unevennesses in the sub-base change the rolling behavior. For a realistic result, it’s worth hiring a specialist company.
How fast is an artificial turf putting green?
This depends on the surface, infill, and sub-base. Manufacturers provide values on the Stimpmeter, for example Stimp 12.
Does a putting green require a lot of maintenance?
No. Removing leaves, occasional brushing, and topping up the sand as needed is usually enough.
